Diesel powered industrial ride on sweeper for cement plant
Mid-Size Rider Sweeper, which can sweep many from fine grains of sand to light debris, can be used both indoors and outdoors, and can keep dust contaminants to a minimum.
The vehicle adopts EATON’s fully hydraulic independent steering system. The oil circuit control unit is set in the cab direction mechanism, the steering wheel rotates to open or lock the corresponding oil circuit, and the power steering hydraulic pump directly connected to the engine transfer provides steering power to the oil circuit, and with the steering wheel rotation direction and rotation angle, adjust the oil supply pressure and supply direction, drive the hydraulic cylinder to drive, and the cylinder drives the front axle steering mechanism to achieve steering. Vehicle control is convenient, labor-saving and safe.
แผงควบคุมการทำงาน
แผงควบคุมเครื่องปรับอากาศ
ปุ่มปรับแปรง
ตัวล็อกแปลงกวาด
สวิตช์มัลติฟังก์ชั่น
เหยียบคันเร่ง / เบรก
3 Specifications
3.1 Dimensions/cleaning capacity of the sweeper
Item | Size/Cleaning Performance |
---|---|
Length (standard) | 2400 mm. |
Height | 2170 mm. |
Width | 1785 mm. |
Cleaning width | 2100 mm. |
Wheelbase | 1226 mm. |
Brush diameter | 650 mm. |
Wastebin load volume | 400 L. |
Wastebin load weight | 530 kg. |
Dump height | 1525 mm. |
Curb weight | 1980 kg. |
Gross vehicle weight (including the operator’s weight of 65kg for a self-propelled sweeper) | 2970 kg. |
3.2 General performance parameters of the sweeper
Item | Size/Cleaning Performance |
---|---|
Turning radius (curb-to-curb) | 870 mm. |
Maximum forward travel speed (in transport mode) – may vary depending on local regulations | 24 km/h |
Maximum sweeping speed | 14 km/h |
Maximum reverse travel speed | 6 km/h |
Maximum gradeability | >10% |
3.3 Hydraulic system
Part | Capacity | Oil type |
---|---|---|
Hydraulic tank | 38 L | L-HV32 (cold environment) L-MV32 (hotenvironment) |
Hydraulic assembly | 45 L | L-HV32 (cold environment) L-MV32 (hotenvironment) |
3.4 Steering system
Parts | Power source |
---|---|
Rear wheel, hydraulic cylinder | Hydraulic oil pump |
3.5 Tires
Tire position | Type | Dimensions |
---|---|---|
Front | Pneumatic tire | 155/70R12C 104/102N |
Rear | Solid tire | 5*4.5-8 / 3.0D-8 |